1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

Active Google redirect virus

Discussion in 'Malware and Virus Removal Archive' started by Prainey, 2010/01/04.

  1. 2010/01/12
    Prainey

    Prainey Inactive Thread Starter

    Joined:
    2010/01/04
    Messages:
    14
    Likes Received:
    0
    Here is the log for Kenco:
    Kenco by jpshortstuff (31.12.09.1)
    Log created at 17:09 on 12/01/2010 (User)

    ========== Task Unlocker ==========

    ========== KencoScan ==========
    C:\Windows\system32\userenv.dll -> Error setting security information [5]!

    ========== C:\Windows\Tasks ==========

    -=E.O.F=-
     
  2. 2010/01/12
    broni

    broni Moderator Malware Analyst

    Joined:
    2002/08/01
    Messages:
    21,701
    Likes Received:
    116
    Uninstall Combofix:
    Go Start > Run [Vista users, go Start> "Start search"]
    Type in:
    Combofix /Uninstall
    Note the space between the "Combofix" and the "/Uninstall "
    Restart computer.

    ================================================================

    Download and install one of these:
    - Avira free antivirus: http://www.free-av.com/en/download/1/avira_antivir_personal__free_antivirus.html
    - Avast! free antivirus: http://www.avast.com/eng/download-avast-home.html

    - free Comodo Internet Security (firewall + AV): http://www.personalfirewall.comodo.com/
    NOTE. During installation, Comodo will also allow you to install AV only, or firewall only, if you prefer to combine one Comodo product with some other product.

    If you decide to install Avast, or Avira, make sure, Windows firewall is turned on, or use Comodo firewall..
    If you decide to install Comodo Internet Security, or just Comodo firewall, make sure, Windows firewall is turned off.

    IMPORTANT! Make sure, you use only ONE antivirus, and ONE firewall.

    After installation, update the program and run full scan.

    Post back when you're done.
     

  3. to hide this advert.

  4. 2010/01/13
    Prainey

    Prainey Inactive Thread Starter

    Joined:
    2010/01/04
    Messages:
    14
    Likes Received:
    0
    I downloaded and installed Avira, and kept my windows firewall on. It performed an initial scan once I installed it. I went back and tried a couple time to run a full system scan, but both times it got stalled at the same point. I will try again so that I can post that log.

    In a strange turn of events though, the google and yahoo redirect issue seems to be solved (at least temporarily). Not sure what this means, but wanted to pass it along.
     
  5. 2010/01/13
    broni

    broni Moderator Malware Analyst

    Joined:
    2002/08/01
    Messages:
    21,701
    Likes Received:
    116
    OK, so we have some good news :)
    Don't worry about Avira scan for now.

    Print these instructions out.

    NOTE. If any of the programs listed below refuse to run, try renaming executive file to something else; for instance, rename hijackthis.exe to scanner.exe

    ***VERY IMPORTANT! Make sure, you update Superantispyware, and Malwarebytes before running the scans.***

    STEP 1. Download SUPERAntiSpyware Free for Home Users:
    http://www.superantispyware.com/

    * Double-click SUPERAntiSpyware.exe and use the default settings for installation.
    * An icon will be created on your desktop. Double-click that icon to launch the program.
    * If asked to update the program definitions, click "Yes ". If not, update the definitions before scanning by selecting "Check for Updates ". (If you encounter any problems while downloading the updates, manually download and unzip them from here: http://www.superantispyware.com/definitions.html.)
    * Close SUPERAntiSpyware.

    PHYSICALLY DISCONNECT FROM THE INTERNET

    Restart computer in Safe Mode.
    To enter Safe Mode, restart computer, and keep tapping F8 key, until menu appears; select Safe Mode; you'll see "Safe Mode" in all four corners of your screen

    * Open SUPERAntiSpyware.
    * Click Scan your Computer... button.
    * Click Scanning Preferences/Control Center... button.
    * Under General and Startup tab, make sure, Start SUPERAntiSpyware when Windows starts option is UN-checked.
    * Click the Scanning Control tab.
    * Under Scanner Options make sure the following are checked (leave all others unchecked):
    - Close browsers before scanning.
    - Terminate memory threats before quarantining.

    * Click the Close button to leave the control center screen.
    * On the left, make sure you check C:\Fixed Drive.
    * On the right, choose Perform Complete Scan.
    * Click Next to start the scan. Please be patient while it scans your computer.
    * After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click OK.
    * Make sure everything has a checkmark next to it and click Next.
    * A notification will appear that Quarantine and Removal is Complete. Click OK and then click the Finish button to return to the main menu.
    * If asked if you want to reboot, click Yes.
    * To retrieve the removal information after reboot, launch SUPERAntispyware again.
    - Click Preferences, then click the Statistics/Logs tab.
    - Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.
    - If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.
    - Please copy and paste the Scan Log results in your next reply.

    * Click Close to exit the program.
    Post SUPERAntiSpyware log.

    RECONNECT TO THE INTERNET

    RESTART COMPUTER!

    STEP 2. Download Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php to your desktop.
    (Malwarebytes is free to use as a manual scanner. Payment is only required if you wish to have it run and update automatically which is not necessary for our purposes)

    * Double-click mbam-setup.exe and follow the prompts to install the program.
    * At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
    * If an update is found, it will download and install the latest version.
    * Once the program has loaded, select Perform full scan, then click Scan.
    * When the scan is complete, click OK, then Show Results to view the results.
    * Be sure that everything is checked, and click Remove Selected.
    * When completed, a log will open in Notepad.
    * Post the log back here.

    The log can also be found here:
    C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\log-date.txt
    Or at C:\Program Files\Malwarebytes' Anti-Malware\Logs\log-date.txt

    RESTART COMPUTER!

    STEP 3.
    Post fresh HijackThis log.
    NOTE. If you're using Vista, right click on HijackThis, and click Run as Administrator
    Do NOT attempt to "fix" anything!


    DO NOT make any other changes to your computer (like installing programs, using other cleaning tools, etc.), until it's officially declared clean!!!
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.