I assume you are referring to Defrag. Unmovable blocks are ususlly files such as the Windows swap file. In Windows 9x-ME that would be a file...
I had a board that did that. I disabled all PC Health and temperature monitoring in the BIOS and that fixed it. It seems this particular...
There is an adapter; but, they don't work on all systems, even when they come packaged with the mouse. If you have quite a bit of trouble...
All of those had serial ports; in addition, some had PS/2 ports. Then there were some that had both. The port you are looking for is a 9-pin...
Put the NIC back in, set it up and reboot. While rebooting, press the F8 key within two seconds after seeing "Starting Windows 98" displayed...
Shorting the keylock pins locks the keyboard.
Use a DOS boot disk and see if the keyboard works in DOS mode.
The switch you describe is not a reset switch; it is an on-off switch. It allows you to kill power to the main board for such things as replacing...
I have no knowledge of the technical aspects of the answer to your question; however, I do know that this has been a problem for many years....
This is a personal preference of my own and I am not advocating that everyone adopt this method. Whenever I install a heat-sink, I always scrape...
Go to www.pricewatch.com and do a search. They are under $20 in Birmingham Alabama USA.
Additional note about the reader/writer: Some reader/writers have a cord permenently attached and some have removable USB cords. Some of the...
Those are good ideas; but, I think I would prefer something else. Fo instance, consider that Compact Flash can be had in sizes up to 512 Megs for...
I have model, serial, etc.; but, nothing for that system is available for download.
I have an HP Pavilion XT926 here with no system restore CD. If you are running an HP Pavilion XT926, please look in your Device Manager and see...
You didn't mention the brand of the modem. The model number sounds like it is an Acer (AOpen). If it is, I can say without reservation that I...
Turning on power supplies is quite different between AT and ATX. Which is it? From your problem, it sounds like ATX.
There is no set standard set of colors for any certain device. All I can tell you is to find the light or switch you want to connect and trace...
More Info Needed: When you say COM 2 will not work, are you writing about the on-board COM 2 or is the on-board COM 2 turned off in the BIOS and...
Have you checked to be sure the Secondary IDE cintroller is turned on in the BIOS?
Separate names with a comma.
