Hi and welcome to the BBS, It sounds like you have covered a lot of areas. There is no other added hardware that can be disconnected? If not, the...
Only one other thing I could think of. There is a slight improvement using the second power pack. The way to test them is to use a multimeter (DC...
Rereading, you do point out the temperature of the graphics card. If it does not have a fan then it should not run at exceptionally high temps. A...
Both temperatures rose. This would suggest that you need a better airflow through the case. First check that the air intake vents are not blocked...
I still would make sure that a good set of graphics drivers were installed correctly. Windows can only communicate with the monitor through the...
Hi Sparrow, From one instance I know of, I think it could. (A fellow burnt out two of his neighbour's/friend's motherboards). I think you should...
This brings back memories for me. When I first started using Win 95 (upgrading from 3.1 :)) at work, DOS would run in German. It was an IBM...
Hi and welcome to the BBS, You could go to Start -> All Programs -> Startup. Check that there are no listings for My Computer or folders on your...
Yes, you will need to isolate the cause. You can use these: http://support.microsoft.com/kb/310353/ http://support.microsoft.com/kb/310560/en-us...
My method would be to remove any added hardware. If it has more than 1 stick of RAM, just use one or if there is only one you could check it with...
Great. A win is a win I suppose :) Thanks for letting us know. Let's hope it helps someone else. Matt
Here is the CPU Support list: http://www.asrock.com/support/CPU_Support/show.asp?Model=P4VM800 I am not familar with P4's so you may have to do...
Look at updating all your drivers, starting from the motherboard/chipset and graphics drivers. Look in Device Manager for any problems listed....
Those Everest figures seem normal. You may have to run some of the programs and check the temperatures again. I am working on the assumption...
The CMOS is a "hardcoded" chip. It is a ROM, a Read Only Memory. It can only be changed by doing an upgrade/flash. The CMOS battery "holds"...
Have a good sleep on it (and read further before making any serious changes). From what I have seen I wish there was a "I have one SATA drive...
If Sensor -> Current = 75*C is right then that's high (Average temps seem to be ??...strange :eek: ) Clean the dust out of your case (do a search...
This appears to be generalized information. Your solution may be here: http://www.intel.com/support/motherboards/desktop/sb/CS-020811.htm#notseen...
Just speculation, but if the battery was really low, the mains power may be directed into charging the battery rather than running the system.
:) I found your motherboard model number on a reply you did in another thread. Here is your motherboard's webpage:...
Separate names with a comma.
