If you have (easy) access to any "normal" Win 98 CD it will be able to perform the scan, then just cancel out of setup after it has run. Going...
Yes, when you power up, the graphics should send a signal for the monitor to start. There is a problem immediately after this. I would guess that...
Hi, Did you install Vista "fresh" or upgrade from Win XP? I haven't installed Vista yet, but I am not going to try an upgrade, straight to...
Hi tenbob, I know the "program moving" utility you are referring to, but I have been wary to use it. I have a feeling that it should be installed...
May not help, but it certainly won't hurt, find updates for the chipset/motherboard drivers, then update the graphics drivers. Everest in my...
Why won't a game run correctly? Check the system requirements first. Laptops can be limited in some areas, but when they talk about a minimum of...
Hi, Run Scandisk in Win 98 or Error Checking (chkdsk) in Win XP on the the 98 partition. You could also try running the HDD manufacturer's...
That rings a bell for me. You speak about a jumper on the motherboard. My Asus m/b of the same vintage has a jumper for setting the FSB as 100 or...
Some things I would check. That the BIOS is set to boot to a "SCSI" or other adapter card before a "HDD ". I am setting up a SATA/RAID card...
If that hasn't answered your question, here is the specifications: http://processorfinder.intel.com/details.aspx?sSpec=SL6W4 You should not...
Hi and welcome to the BBS, "Reload "? Are you trying to reinstall Windows over itself? If so, you need to start the computer with a Windows...
In Control Panel -> Internet Options there are settings for colour and fonts at the bottom of the first (General) tab.
Chiles4, graphics is from what I can find. System Requirements for FIFA 07: Looks like it should be well within requirements. You do have...
Sorry, I meant to reply the other day. At the basic Dell configuration the PSU will probably cope, even though it may be under heavy load (see the...
Hi Charles (or is it Charels :) ), All the major HDD manufacturers have a cloning program in their utilities. I would remove the #2 HDD, clone...
Just check if you may need to make the "safe mode" selection to get it to run. Matt
You will need to look at the drive manufacturer's website for if there are tools and utilities to reformat the drive.
sdeannas, my suggestion was as much aimed at Rockster2U, Charlesvar and the others. They will take those into consideration. You can come back to...
If it assists anybody. I have come across that message once or twice. I concentrated on "...a recent hardware or software change... ". Any...
Phew, that's lucky. I thought...if the motherboard gets sent back and a few weeks later it comes back with a note attached that there was nothing...
Separate names with a comma.
