That might be right. On the secondary controller on one of my older machines, the DVD drive (drive O...master) is listed as Auto Detection, DMA if...
I suggest checking the configuration. Look at the jumper configuration of the drive, try changing it as master/slave. Do you have any other drives...
Hi, The adapter runs to your IDE controller, so if there is some sort of problem with the controller (even drivers) it will be exactly the same....
I'll just speak as though it was me with the problem (I've replaced the guy that has any new ideas :D ) Test running it without IE7 for a...
Something that should do what you want is Control Panel -> System -> Advanced tab -> Performance, Settings -> Adjust for best performance. This...
Instructions here: http://www.intel.com/support/processors/manuals/
"Tweaks ", only do them one at a time and see how your system responds. Undo the tweak if there is any adversary effect (the last tweak you did...
You take it in your bag in hibernation mode (if I am reading correctly)? Is that OK by the User Guide? Quite possibly, but me, I wouldn't...
If I'm not dragging this along too far. There will probably not be anything faulty with that RAM module, it can just be incompatible with the...
John (usasma), that fix relates to pre-SP2, I was thinking about disabling Hyperthreading in the BIOS settings(??). You asked for it :) There...
As another test I would run Error Checking (chkdsk) on the drive. See Help and Support. Matt
This is a new build. If I found I could not get a keyboard and mouse to work in Safe Mode I would check the BIOS settings (the settings should all...
That's all you can do unless someone can see a specific cause of the problem. Of course, post back here if it continues (post back if it seems...
I am not quite sure what you mean as well. Do you mean a Windows ME system restore or are you using a manufacturer's "restore disk "?...like a HP...
That's OK Neil. You are mixing a new processor with an older motherboard. There was not a lot of information to be found at the Abit website...
Good luck with it. Actually, I thought whiskeyman's suggestion to stop system restore may just possibly do the trick, I have disabled it on my...
Hi all, I had a look at the motherboard manual. There is a setting in the BIOS "Load Optimised Defaults" you should find this setting will...
You will need to do the tests Chiles4 suggested to isolate whether the problem is with the graphics or the monitor. "No signal" would make me...
Have you installed (or do you need to install) chipset/motherboard drivers? Are the drivers listed as being for Vista? Have you checked all...
Ks.sys and mup.sys are Windows (driver?) files. If the dumps referred to third party driver files you could look for updates for those. Since...
Separate names with a comma.
