Use your jumper to clear the CMOS settings and then go into BIOS and use the setup settings. Clearing CMOS will let you get into the BIOS...
Recheck your floppy cabling and make sure your keyboard is firmly plugged into your computer. You may also need to go into the bios if you can get...
re: hissing and ticking - soundcards can be a major pain in the arse when setting up a machine. Usually, the culprit is the DOS emulation driver...
OK, here's the scoop right from Abit. Four 184-pin DIMM sockets support PC1600/PC2100/PC2700 DDR DRAM modules Supports 6 banks up to 3GB DRAMs...
Again - Congratulations and thanks for posting back. ;)
Phew ------ Glad to hear it Dig. Congratulations. Thanks for posting back. ;)
Hehehe ..... EDO on a DDR board? Guess someone is dating themself, eh KK? - err uhh Dude. Don't know that particular Abit MB, but think you'll...
Most lower shells are a combination of screws and snap fittings, but if you don't know what you are doing, take this to a qualified technician...
I won't claim to know something that your CDRW drive mfg doesn't, but I've always had better success setting CDRW's as slave to a DVD or CDROM in...
Best to read up on this MB and discover the differences between registered and unbuffered memory before asking hypotheticals. ;)
You got that right - wouldn't called that in a hundred years. ;)
You can download software from HP including all your drivers although it sounds as if you have those. In that software are utilities (toolbox) to...
Couldn't leave this one alone. Yes, it can make a big difference as to what you install in which slot. Some MB's won't recognize a larger SDRAM...
hehehe ...... Hiccups can kill ya. Ever heard of the kind that don't or won't go away? "most PC100 will run great at 133 FSB at CAS-2 " Oh...
You may want to try removing the drive while in safe mode then doing a complete shutdown, then physically removing the drive from your machine...
$145 at www.tcwo.com - just bought two myself! ;)
You should be able to buy an OEM tray version of this for $214 but if you wait another week or two when the 2400+ and 2600+ hit the street you'll...
You're probably going to get a diversity of opinions here but I'd strongly recommend #3. Slave it in another machine, grab the files you want and...
I think you will find an Athlon XP 2200+ makes this a non question question. For that matter, so will a 1900+, a 2000+ or a 2100+. And, if you...
Easiest solution is to first try another cable that you know is ATA 100 - 80 wire. As an aside, I have never used any Seagate software to enable...
Separate names with a comma.
