Do the proceedures I directed and let me know if you have full access in safe mode. And also if things are different when you boot back to...
Gaynor This could be many things. Are you able to get on the internet from this computer or are you on another computer? Here are a...
Ok Sounds to me like a setting in BIOS is incorrect. Go into BIOS and look for a setting that says Load setup defaults or if there is a...
OK Chris good job! While we are waiting to see if the bsod is gone what about general performance now that you did the steps. That was...
In safe mode remove all primary and secondary controllers. Reboot (windows will reinstall on boot) recheck the controllers in full. Had some...
Have you added any other IDE controllers? The secondary IDE should show up in device manager even if not used. You stated that the BIOS had...
Hi Chris Yes with that additional info it would seem you are correct. Also I was at work yesterday and quickly scanned your message. On...
Hi Chris, welcome. Not enough info to pin point anything? Do you have Broadband (cable or dsl)? Have you had a hit by a virus in the...
If you boot up to C: without the Win98 CD boot floppy to load the driver then here is what you have. An empty dirve C: with nothing but...
You still have an empty drive. You now need to boot from the win98 boot floppy with the windows 98 CD in the cd drive. After boot with cd rom...
Merlin YOUR QUOTE I know you never said that, but you still have not told us why you think a Windows scandisk is better than a DOS scandisk....
I used to have a link to a site that gave the differences 2-3 yrs ago. Cain't find it now. But some of the things besides a deeper testing of...
Hi Merlin The Windows scandisk is definately smarter than the dos one. Probably don't close all but these would only be a few of the tens of...
No no not mad! Sometimes people just don't like the answer and need a little jolt! Just trying to make you understand. Downloading from a...
Saw the exact same you describe myself more than once. I sat for 30 minutes recovering recovering and still it was not salvageable. Chances...
Right you are about not completing, confused that with Remunds2000 who i was posting to at almost same time. Guess I am getting tired! But I...
He may have two problems here! 1. Scandisk on startup 2. Scandisk does not complete I already knew about the first. I also know about...
Begin with cleanup. Do not be intimidated by the following just do them exactly step by step. Cleanups These are for 95 98 ME only! Boot...
Cleanup some Do this: Configure CleanMgr to max settings Go to Start-Run and type cleanmgr /sageset:1 The above need only be ran once...
You would need them if not using a router. But with a router it don't matter if you have a hundred. Forget it! Now you do have access from...
Separate names with a comma.
