Then the ICS is not working yet On the Win98 computer Network neighborhood properties. TCP/IP DNS Configuration Put the below number in...
Open the secondary window from the first. Then close the first. Then resize the second/last window and close it. Should be OK next time! mike
Ray Don't know exactly what this is so begin with a cleanup. 1.Configure CleanMgr to max settings Go to Start-Run and type cleanmgr...
Yes setting netbeui as default is correct. The fact that you can see the XP across the network with TCP/IP removed proves netbeui is working,...
Well thanks for letting me know about the USB! As for the rest of this message it makes absolutly no sense to me. Are you trying to speak in...
They are worth doing! But if you don't know how to handle booting to dos forget it! mike
Yes there is a way! Very complex would not try to message you thru it even if permitted. To answer this request would violate posting rule...
You should not need pin assgnments! You may not have the correct PS for the mother board. Does it have a single wide connector or 2 small...
Lewis Do the following cleanups these will help performance greatly but the DOS cleanup specificaly clears the shellicon cache. First...
OK I see by the IP of the XP that you do have ICS installed! On the 98, network tcpip properties manually set the IP to 192.168.0.2 subnet to...
Do you have ICS (Internet connection Sharing) activated on the XP? If not you will need it to allow the 98 to connect. Go to command prompt...
We were answering at the same time! Glad it is fixed! mike
Which computer has all these settings, or both? BTW, XP Pro or yuck XP home? If you do not use VPN in or out (if you don't know if you use...
Don't matter, unless you have some souped up T1. Most T1 is in the range of 1.5 - 3 mbps. T3 and frame relay can be faster than 10....
Clarify your problem! By stalling do you mean a long pause, then it boots? Or from what you are saying you cannot boot at all? If you can...
Margot On the XP 1. go to control panel-system network idintication and get the workgroup name of the XP. Note it down! 2. create a new...
Jazzbo You say on reboot (restart), that means it starts up from power off correctly? If so does it always shut down and powerdown...
10-4 to Dale! That is exactly right! Mike
That is the Adobe Type Manager (ATM). Hit F8 repeatedly while booting to get boot menu. Chose safe mode. Start run sysedit chose...
Separate names with a comma.
