Slow poke here - been busy. Run thta utility Sparrow sent you or Everest and see if you can confirm what the CPU is. Post back and we'll go from...
Try This One. ;)
Not a clue on your error messages - I still run the old version of WinDrivers Backup and got that link when I went to the old site, apparantly its...
Couple more thoughts before you reinstall. I'd recommend three utilities for you. First, Download and install RegCleaner. Run it and remove any...
For starters, I'd download and install Everest. See what that tells you about each memory module and the CPU. I'm not sure if this will properly...
No arguements with exhausting top fan unless it raises temp as previously stated. Norm is exactly as Sparrow states. Two other things to...
Congratulations - tenacity and persistance paid off for you. Enjoy. ;)
Think you can right click on it, select options or properties and kill it starting with Windows. If no success there click on ATI settings if you...
First and perhaps most important, I'd reinstall if I were you. Secondly, "My BIOS Auto Detect is called Reset Configuration Data" is incorrect or...
According to Maxtor you have a style C drive and there are 4 options (not including a capacity limiter) for pinouts with DS being the correct...
Well, that would have caused a problem right there. One can't have one HDD jumpered as CS with another jumpered as slave. They should have both...
??????? :confused: Whats going on here? OK, this doesn't sound right - Thought 1600+ (1400MHz) was the slowest Palamino made but there could...
One would have to know what the drive is in order to comment. :rolleyes:
Hehehe .......... Are we having fun yet? Starting to make me cry a bit. I have a blown channel on my main power amp that needs to be repaired but...
Start Here :rolleyes: If you still can't find it - let your fingers do the walking.
No, some AMD boards also utilize this 12V connector in addition to the main ATX power header. It is NOT Pentium Specific - varies by mfg and...
jongru: I'd advise you to spend the $15 and get a newer CD from ATI Tech. It will take about 10 days and includes a couple of things you can't...
OK, I give up :rolleyes:
Maggie: That's very correct for a machine when one is trying to boot from IDE 3 or 4 with something like a Highpoint Controller but I think this...
You may want to investigate your ACPI settings in your BIOS setup under power management. Could be you're trying to use a standard that doesn't...
Separate names with a comma.
