Here's a little tool for you. You can save a scan range using the bookmark feature - ie: 192.168.1.1 - 192.168.1.254 and upon completion you can...
I can be a little quick to pull the trigger but I'd certainly agree that the CPU temp is out of whack on the high side. I am also going to...
Let me be the first to advise against RAID 0. Its a good way to lose everything on your drives should one ever hiccup and at best, you will get a...
Can you post your current Memory settings re: CAS TRCD (RAS to CAS delay) TRP (RAS Precharge) TRAS (Active to Precharge) Command Rate...
Bill: You make a good point but I believe his motherboard also has a post indicator LED and it is showing a very specific error re: voltage....
Couple of quick thoughts that you may have already been through. Check the 3 pin CPU fan connector at the motherboard or if you are plugged into...
You might (and I qualify this because of whats probably already installed on your original Seagate) have a few issues to deal with here. Since you...
Not trying to be a smart a_ss with this answer but you have three potential areas to investigate - monitor, video card and cable. If you can try...
neilstan: If you put your motherboard CD in a known working computer and use windows explorer to preview whats on the disc you should find a...
There should be a utility on the Asus CD which will make the driver floppy for you. Abit motherboard CD's now have a utility one can run with no...
Question - How many operating systems are you planning on installing? Sounds to me like that technician (assuming he was the builder) might need...
Next time, and I suggest you make time for a next time based upon your comments re: problems - you might find it easier to delete the partition...
Your drivers (software) would be located on a hard drive so if you wiped the drive and didn't re-install drivers the answer would be yes. However,...
This is what throws me into a bit of a loop because you cite a SATA drive as being non-recognizable. As a point of reference, I added a PCI RAID...
Hehehe ........ If anybody figures out how to re-letter the system drive, I'd sure like to know about it. About the only solution as I see it is...
Couple of quick thoughts. Did you initailize the problem drives when you brought them into the current machine environment? Were they formatted on...
Not really - you might have thought you wiped it out but you left some drivers among other things and thats what came back to bite you. Had you...
Very good point and yes, this still applies for standard IDE ports. Not so for the SATA controllers. ;)
Separate names with a comma.
