I am in the process of upgrading my computer and have encountered a problem setting RAID 0. I have setup RAID 0 before without any problems, but...
Thanks for the replies........... I have now thoroughly cleaned the PSU by taking the cover off and blowing compressed air through it and...
Can any one tell me if the following readings are correct. The + readings seem to be OK but I do not understand the - readings + 3.3V Voltage...
Turns out it was the refresh rate, which I have now changed from 60 to 75mhz and everything is fine. Thanks FBW
What is the most likely cause of screen flicker ? It seems to be slowly getting worse and as it happens on both of my computers I suspect that my...
Thanks for the suggestion Johanna. I Have checked the mouse and it is working correctly. Regards FBW
Hello Steve Tried it...................same problem on PC1 I also suspected the KVM switch. However I have now ruled this out as I was so...
Over the last month pointer movement has started to get a bit sluggish now and then. It finally came to an abrupt halt about a week ago when I was...
Thanks for the message Unfortunately this problem still exists and no one seems to have any suggestions. Freeserve helpline aren't any use with...
Anyone experiencing problems sending group Emails through Freeserve? I regularly send Email to 2 "group" recipients, both made up from address's...
Separate names with a comma.
