Sigh!!!!!! Just re-read the thread from the start and saw that you already tried the repair install. Not gonna delete the post as it's not...
Good point, Iclarius! Another thought would be to set your bios to boot from CD first, or second. Dosen't matter as long as it's before your...
Bad news first. I've taken a drive straight out of the box and had it be bad. A drive can go at any time. Device manager won't always show that...
Just a note... Since we know that the video card and monitor work at at least some level (or you wouldn't know it's when windows is about to...
ARGGggggggg!! I had that problem with my Athalon 1gig and Radeon 7000 on an Expox board I had until recently with win 2000... Danged if I can...
Adela, The pin you see 'missing on the 39, actually a 40 pin connector, serves a definate purpose. This pin is not used by the system for the...
Look real close at the mother board. On many Socket 7 or Super Socket 7 boards you will see a table of jumper settings printed on the board...
Sometimes tracking things down can be tedious and time consumeing but I figure what ya just did was a lot cheaper than taking it to a shop. :)...
Not part of your problem but change the boot order to CD, Floppy, Hard Drive. If you don't have the floppy and CD set to boot before the Hard...
With anything spinning that has a squealing noise I would suspect the bearrings. The only reason I could see the noise getting louder while...
If your system is no longer supported by the manufactuter you may very well find more current drivers for USB, etc. at Driver's Guide To do a...
Just as a note... If the modem fails after the windows re-install it does NOT mean that the modem is positively bad. Just a good chance. If...
I would say that you have then probably ruled out the possibility of there being an on-board modem. In most cases there would be a setting option...
Separate names with a comma.
