Maybe the problem is the keyboard? Is it a USB type or the regular one?
Good Luck :)
Get rid of Norton and it may solve your problems. Have heard many bad things about their software. I know one person who installed Norton it it...
This may be a dumb question but are you booting with a new hard drive to a fresh install?
Well I am not sure how long your drive will last but I sent in a drive to Maxtor that began to make a fairly loud thunk noise. It was clear the...
That is the sound card.
If the modem is built in then there would be a spot to plug in a telephone wire in the back and it would be an RJ11 type. Which Genica modem did...
The board cost me $195 CDN which is about $160 US. So far the MSI boards are pretty good and the quality seems on par with Asus. There was one...
Just built a computer with a K8N Neo 2 Platinum motherboard and it works very well. With MSI update its easy to update the drivers, BIOS and other...
I'd try a different brand of modem. I have had good luck with US Robotics and have heard Diamond modems are good to.
I know some manufacturers use chips in the ink cartridges to render them useless once empty of ink but my question is how do they do it? I am...
Do you have enough ram in your computer? I had a machine once that did the same thing and by adding more ram it cleared the problem.
My answer, FWIW, is its probably better to leave it going all the time. It would be the heat the drive creates that can shorten its life. Would it...
I would try to reinstall the actiontec modem drivers to get rid of the hardware wizard popping up.
have you updated to SP2 for your xp OS?
Found out the person who owns this computer has never used the floppy in over 2 years. It was packed with dust so its no wonder it would not work.
If a computer that has a bootable floppy in the drive and during power on, it goes right past the floppy drive without booting, could that...
is the problem related to any recent software installation? Have you run a spyware check lately?
format your new drive and start over to copy the files from one drive to another using the ontrack software. and when its done copying you need to...
What I have done in the past when I get the message ntldr is missing is to boot the computer with the XP disk in the drive. Continue until it asks...
Separate names with a comma.
