My newbie friend complained of a tremendous amount of prono pop ups. Turned out there was a rather agressive program called "rapid blaster "....
I am throwing in the towel I am throwing in the towel on this one. As long as the Cd works it is no big deal. ;) :cool:
maybe someone can help with the a: drive The a: drive will still not read. The drivers are there, the diskette drive has been replaced ,...
celeron 400 As usual you are right. What do I know "I am from the country ". I swear however it was labelled as a 200 mhz but.......
cd rom works a: does not the cdrom suddently starting working its ok. the a drive will not read. It is getting power from a new cord....
machine up and running ? The machine is running to some degree (Win 98) the boot problem turned out to the ram chip not being seated properley...
CPU fan erratic Just trying to be helpfull. You don't have to run salt in the wound. Just out of interest the Cpu fan is erratic (on not...
jumpers set, one drive dead still Jmatt, thanks for your help. Now I know something about jumper settings. Very usefull. Tell you...
fans work few clicks on boot the fans are working when the machine boots it issues a few clicks and then stops any ideas?
Well I've done it again !! Mark Twain said "If its not broke don't fix it " My son's friend has a 200 mhz Celeron e-machine with a 3 gig hard...
still porblems !! Mahmud603, well still !!!. run the cios setup cahnged the "on board chip - usb" from disabled to...
comparison hits ad-aware 6 & spybot Anyone compare spybot (with update) vs ad-aware 6 count from ad-aware 6 -13 hits from Spybot (updated)...
I am giving an old smaller hard drive to my son's friend. The newer hard drive is 6 gigs The computer is an older Celeron (approx...
usb mboard check and bios settings thanks for the rapid answer, to check the pins marked usb on the...
This is further to the thread "usb pci card install problems " Foregive me if I should of continued the thread- however this is a new...
and ???? This computer will save you time. Well I tried everything went through all the proper procedures and in the end for no good reason...
Help again, I am trying to install new hardware with Win 98 se It is a Usb pci card adaptor the hardware...
in the end all it was a loose cable ;) :D how foolish of me
Zephyr, according to aida32 under "pci devices" the firelink usb controller is there - no sign of floppy under...
floppy disk (s) fail (40) Zephyr, after the power source install I get the following error message on boot " floppy disk (s) fail (40)...
Separate names with a comma.
