Unlike some other printer makes, many of HPs cartridges contain the printhead on the bottom of the cartridge. Since the printhead lifespan is...
Dennis, Found a couple of pages of TRS 80 stuff on ebay - have a look here.
Hi Jerry, Could it be this one here or maybe this? You can also use your BIOS string to help ID your motherboard - check out this site....
The syntpenh driver provides capabilites for the touchpad on your Gateway. You may wish to try removing the program from add/remove programs in...
Well, For me I just look at the feature that the current board has and try to get one with the same features. Obviously it should be a board...
Hi Giles, Not having owned an Abit board myself I wasn't aware of that feature - seems like a nifty tool. :) I must keep that feature in mind....
Hmmm.... PC2100 only runs at 266 Mhz. So we're going to feed a 333Mhz FSB with memory running at 266 Mhz - I can't see that being a stable...
I have at least three different HDs rated at speeds higher than the controllers they are connected to. 30GB ATA 133 on an ATA 100 controller...
Gentleman, I appreciate your candor. As a side note, speed and throughput of the file server are much improved with the Ultra ATA controller...
Russ, You may or may not get the mouse to work through a ps2/serial adapter. It's a bit of a gamble, but in my experience if the mouse does...
Moron Alert Well, there's nothing more embarassing, in my opinion, than to run into problems with something because you didn't follow the advice...
So I have this ancient K2-500 that sits in the basement with an 80GB HD and Windows XP Pro. All it is used for is file storage. I don't have any...
Three possiblites for this: 1. Bad floppy drive 2. Bad floppy disk 3. Incorrect startup disk. My money is on number 2 or maybe a...
Hmmm, Seems the registry cleaner was little too thorough!! Edit On reflection, if we're getting 'enter command interpretor' we've got...
bikerchick4God, Reboot is correct, without that USB legacy support turned on then your keyboard will not work outside of windows. Solution...
Joshua, Depending on your sound card this can be extremely simple to complex. If you have a sound card with a sincle output jack for the...
Rockster, Well...... I was already in the process of swapping out the P/S when I originally posted. A switch from a 250W supply to a 500W...
This one has me beat. I have an IWIll KD266 Board with an Athlon 1.1 and 256 MB RAM. When this system boots up I get the standard...
ralfska, You don't say if you ever got anything to work on this com port. Assuming that you haven't could it be that the port is not turned...
When I have seen out of range it sometimes refers to the refresh rate of the video card being too high - the monitor telling you it is "out of...
Separate names with a comma.
