I only ran XP for a short time before going back to 2000 (Gonna have to break down and go back to XP eventually but like 2000 better) Anyway, in...
You might try disableing the built in burning for XP. I don't run XP so I can't say for sure but as XP's burning won't do DVDs it may be a factor.
With only one IDE conector on the mobo The only way you are gonna get two hard drive and the CD going at the same time is by adding an IDE PCI...
Congrats to a point!! :) I've been following this thread but not putting much into it as a lot of it is over my head. Something bothers...
Hopefully you have all your drivers or windows finds them in it's data base. The reason that your screen image is small is that when installing...
You're right that they are actually different but I was basically just looking at 1 ROM and one burner. Bottom line is we both agree that #5 is...
As a start I would make sure that DMA is enabled on the drive. Go to your device manager and make sure that DMA is enabled for the hard drives by...
Hi, Hugh Jarss, Looking at your two posts above this one and looking at the link you gave tells me that you are way beyond me on this.......
The first is a read only CD drive with a CD only burner. The second is the same except that it can also read a DVD but not burn one. The third...
I can't offer much help with the ASPI issue but can get you backed up on the 6+gig cd. ZIP the entire DVD and save the zip file on your hard...
Adding on to what Hugh Jarss suggested you might want to go ahead and pull the sound card, CD-ROM, and any other cards other than video. Just try...
This is personal preference but I stay from all in one printer/scanner/fax units. I don't need the fax as the 56k modem in my machine does it...
Are you sure that you don't have both the hard drive and the CD jumpered to master. If, as I suspect, the CDROM was origionally plugged into the...
It worked before you did anything. Hardware is all the same EXCEPT that you swapped sound cards. I would put the origional sound card back in...
:eek: :o OOPS!!! My above statement would not cause a shutdown... (hi Mattman) It would just cause a 'hang up' on posting. Sorry, I was...
Unless you have gone to the bios and disabled floppy support, the removal of the floppy may very well be causing your problems.
Ahhhhhhh, Sparrow, I would agree except that a CR-R will not allow packet writing such as with InCD. Once a CD-R is written you may be able to...
90 degrees is WAY to high! Do not run or try to run this machine as it is. Although it may already be too late for the processor. I would...
Figureing that you have the box open and can see that the fan is running, go to the bios and see if there is a monitor that will show the...
Also, are you aware that the board is designed as a server? Also you stated that the processor was a P3. I assume that's a typo as it's too fast...
Separate names with a comma.
