To access the BIOS: If your 600X BIOS is anything like our 600E, there's not a whole lot you can do in there.
Have you tried using the horizontal and vertical sizing buttons on the monitor? It might work to set Windows to use one of the standard monitor...
Nope. The minimum requirements to get a display are - motherboard, CPU, RAM and video card. A CPU fan is not required to get a display, but...
Not being able to boot from the floppy drive doesn't have anything to do with what is installed or not installed on the hard drive. You should be...
I'm about out of ideas on this. Can you borrow a boot disk from someone else? Test it on their system first, to make sure it does work.
If you attached the floppy drive to the connector nearest the middle of the cable, that's most likely the wrong connector. Try using the other...
Not sure what you mean by this??? What's a "shorter" and what is "the other one "?? The way the floppy drive should be connected is with the...
If the floppy controller is dead, it may be kinda hard to replace it. Most floppy controllers are built onto the motherboard, which (of course)...
Check the CMOS setting to ensure the floppy drive is set as the first boot device. Boot from a Win98 boot disk and format the hard drive....
Not sure on the CPU temp, but for the fan - place it at the front of the case so that it draws cool air into the case.
It does sound like a virus: http://securityresponse.symantec.com/avcenter/venc/data/w32.magistr.24876@mm.html
Is Print Sharing installed, enabled and bound to TCP/IP? Is the printer shared? Edit: And, is the printer networkable? Some printers...
Have you tried using the jumper to clear the CMOS?
Doing a quick search at Lemark's site, I found this: General Info Looks like that printer isn't designed to work over a network, but may...
Some of the older USR modems had jumpers on them to set the resources used - i.e. COM2/IRQ3. With these type of modem, you normally have to run...
XXCopy should have made an exact copy of the C: drive onto the D: drive. Maybe the program importing app will still work - couldn't hurt to try :)
Great :D
If the info is still on the other drive - i.e. the D: drive is still setup the same as it used to be when it was the C: drive (a bit more info on...
Besides following Dan's excellent advice, can you try moving/re-routing the cable so it doesn't run parallel to the TV cable? The network cable...
Distance and the cable routing could both affect this. How long is the cable, and is it routed nearby or parallel to any other cable/device (such...
Separate names with a comma.
