1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

Resolved Service Control Manager Error 7026

Discussion in 'Windows XP' started by pcneedsexpert, 2011/08/08.

  1. 2011/08/08
    pcneedsexpert

    pcneedsexpert Inactive Thread Starter

    Joined:
    2011/08/08
    Messages:
    4
    Likes Received:
    0
    Hello, everyone.

    Well, I am in real strife. I am asking for help as a last resort because I just can't solve my problem alone.

    My problem started a couple of days ago, and I cannot use my computer at all in normal start-up mode.

    The error that is reported in the event viewer is in the title of this thread. The description accompanying the error message follows:

    The following boot start or system-start driver(s) failed to load:
    AmdK8
    AvgLdx86
    AvgMfx86
    Fips​

    In addition I am getting a blue screen STOP error 0x000000EA when I reboot normally. It reports that the problem file is nv4_disp.

    I should add that I had this exact same problem a year or two ago. The solution at that time was as simple as changing some setting (or perhaps a single registry value - I can't remember). I found that solution on the Internet somewhere, and I have spent around 12 hours trying to find wherever I found it last time. My point in saying this is that, on that occasion, there was nothing wrong with my video card/display adapter (NVIDIA GeForce 8500 GT) as many of the threads on the Internet regarding this problem suggest.

    Can anyone please help?
     
  2. 2011/08/08
    Admin.

    Admin. Administrator Administrator Staff

    Joined:
    2001/12/30
    Messages:
    6,687
    Likes Received:
    107

  3. to hide this advert.

  4. 2011/08/09
    pcneedsexpert

    pcneedsexpert Inactive Thread Starter

    Joined:
    2011/08/08
    Messages:
    4
    Likes Received:
    0
    Hi, Admin. Thanks for your reply. However, I have hit a couple of snags.

    Firstly, the SDK stuff failed to install. The message said this could be caused by running in safe mode (which is the only mode I can run in).

    Secondly, a search for cdb.exe did not produce any results.

    Should these matters be resolvable, what is my dump file (referred to in the instructions in the link provided)?
     
  5. 2011/08/09
    Admin.

    Admin. Administrator Administrator Staff

    Joined:
    2001/12/30
    Messages:
    6,687
    Likes Received:
    107
    In this case, start with a Malware check.

    AvgLdx86
    AvgMfx86

    is your AV, and if that doesn't start, you could be infected.

    Read this post, then post the requested log(s) in the Malware and Virus Removal forum.
     
  6. 2011/08/11
    pcneedsexpert

    pcneedsexpert Inactive Thread Starter

    Joined:
    2011/08/08
    Messages:
    4
    Likes Received:
    0
    Well, this is embarrassing. It would have been much easier to slip away unnoticed with my tail between my legs, but I figured you deserve to laugh at me after trying to help.

    I recently moved house. During the move my computer must have received a bit of vibration somewhere along the line and eased the contacts between the card and the slot a little. In the end all I had to do was put a bit of pressure on the card to reseat it (no discernible movement, mind you).

    Problem solved!

    Thanks for your help.
     
  7. 2011/08/11
    Admin.

    Admin. Administrator Administrator Staff

    Joined:
    2001/12/30
    Messages:
    6,687
    Likes Received:
    107
    Happens to the best of us :D

    Please mark your thread as 'Resolved'.

     
  8. 2011/08/11
    pcneedsexpert

    pcneedsexpert Inactive Thread Starter

    Joined:
    2011/08/08
    Messages:
    4
    Likes Received:
    0
    Done! Thanks again.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.