Using pop3 connector with Exchange 2000

I need some help from someone who has used (with success) the pop3 connector in Exchange 2000.
Im running win2ksbs server with external e mail addresses hosted by my ISP.
Long story but I havent had any luck making this thing work.
If someone could leave an e mail address so I could make a phone call to you at your convienence?
Thanks,
Scott

 

This BBS isn't really phone support. It is best effort via post. If you require a walk through over the phone, your best effort would be to call Microsoft, or your hardware manufacturer.
Otherwise, I may able to provide assistance via the board on what you are trying to do.
I have setup a few pop connectors, both SBS 4.5 and SBS 2k. I'm also well trained in Exchange 2k if you look at my website.

 

That's ok Eric I got help.

Thanks anyway...

Another user of this fine board offered to help me through remote desktop and we got it sorted out.

I have helped several people on here over the phone and didn't have a problem with it. But then again I don't have all those letters behind my name either. I find it most useful to help others with their problems and gain knowledge in the process.



Oh and buy the way, I can’t call the hardware supplier because I built the machine.

Here are the specs on the machine.

Tyan Tiger 133 socket 370 with twin PIII 933's

4 IBM IDE Ultra 100 20GB Hard Drives

Promise 100 Raid card Configured in Mirrior/Stripe

512MB PC133

Enlight Entry Level Server case w/ 8 5 1/4 bays, 3 fans, and air filteration

Pioneer DVD ROM

Sony DAT drive and SCSI card

WIN2KSBS

Veritas Backup Utility