1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

Resolved Triple Boot Question

Discussion in 'Windows 7' started by Alpha_and_Omega, 2011/06/05.

  1. 2011/06/05
    Alpha_and_Omega

    Alpha_and_Omega Well-Known Member Thread Starter

    Joined:
    2005/03/26
    Messages:
    181
    Likes Received:
    2
    I'm not sure if this is the right place to ask this question, but since it seems to be a problem with Win7, I'm asking here...

    I have had no problems setting up a dual boot system using XP and Vista, aswell as a system using XP and and Win7... But the problem I'm having right now is setting up a triple boot system using XP/Vista/Win7..

    I install XP first then Vista and all seems fine, however when I then install Win7, it disables Vista and I can nolonger access it. It completely removes it from the boot menu.. I've tried installing Win7 after XP then Vista, but I get the same result.

    Anyone know a work around for this?
     
  2. 2011/06/05
    PeteC

    PeteC SuperGeek Staff

    Joined:
    2002/05/10
    Messages:
    28,896
    Likes Received:
    389

  3. to hide this advert.

  4. 2011/06/05
    Alpha_and_Omega

    Alpha_and_Omega Well-Known Member Thread Starter

    Joined:
    2005/03/26
    Messages:
    181
    Likes Received:
    2
    I've tried that PeteC.. Vista doesn't appear anywhere.. However I will try it again just incase I missed something somewhere.... I'll let you know how it works out...
     
  5. 2011/06/06
    BurrWalnut

    BurrWalnut Well-Known Member Alumni

    Joined:
    2003/03/05
    Messages:
    628
    Likes Received:
    8
    In either Vista or Windows 7 (depending upon which is currently installed), run Disk Management by right-clicking Computer > Manage > Storage > Disk Management. The drive that is labelled as System and Active is where the boot files are stored for every Windows operating system that is installed. It is where the initial booting starts from.

    Now boot from the drive that has the boot files on it and run EasyBCD from there. Go to Add New Entry and in the top pane select the drop down Type box for the missing operating systems, e.g. Vista/Windows 7, Win NT/XP and Win 95/98. Depending upon which system you want to add, give it a meaningful name and point it to the appropriate drive and click Add Entry.

    NOTE if the box is greyed out, make sure the drive letter is correct and click on Add entry again.
     
  6. 2011/06/08
    Arie

    Arie Administrator Administrator Staff

    Joined:
    2001/12/27
    Messages:
    15,174
    Likes Received:
    412
    I have nothing useful to add, except that I don' know why people insist on dual/triple booting instead of using VM software....
     
    Arie,
    #5
    GERT likes this.
  7. 2011/06/10
    TonyT

    TonyT SuperGeek Staff

    Joined:
    2002/01/18
    Messages:
    9,072
    Likes Received:
    400
    In some instances, a VM is slower than a drive install. (older hardware)

    Also, a separate drive install can be used for repair, disk cleanup & virus removal by accessing the other operating system drive if it's in need.
     
  8. 2011/06/11
    Alpha_and_Omega

    Alpha_and_Omega Well-Known Member Thread Starter

    Joined:
    2005/03/26
    Messages:
    181
    Likes Received:
    2
    TonyT, this is exactly why I use dual or triple boot setups. I found it can save alot of problems.

    Also, I did finally get it to work. I re-did the system in this order 1st: WinXP, 2cnd: Vista and 3rd: Win7..

    I found this in a way strange because I did the original installs in this same order, but EasyBCD did not pick up Vista.. This time, it did.. Everything is working perfectly now..

    Thanks everyone....
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.