1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

New computer doesn't show POST at start up

Discussion in 'PC Hardware' started by robls99, 2009/02/27.

  1. 2009/02/27
    robls99 Lifetime Subscription

    robls99 Well-Known Member Thread Starter

    Joined:
    2004/01/16
    Messages:
    780
    Likes Received:
    1
    I have a brand new XP-Pro, Intel DP45SG dual core, E8600.

    At start up, I don't see any Power On Start Test flash by showing the various start up items that I have been used to seeing all these years.

    I seen a brief flash of something and then the usual Welcome and MS logo. Everything works fast and great but I still like to see the POST. The fellow that built it checked the BIOS and all that stuff but doesn't seem to know what to do.

    Any suggestions?
     
  2. 2009/02/28
    PeteC

    PeteC SuperGeek Staff

    Joined:
    2002/05/10
    Messages:
    28,896
    Likes Received:
    389
    Your best bet is to study the BIOS section of the mobo manual closely although the actual BIOS may be different from that described.

    There is no option in my BIOS to show/hide the POST screen - which does show on boot.

    The only setting that may, if present, allow you to see the POST screen is Quick Boot - generally Enabled by default. If you have that option try disabling it.

    There may also be an option to show the Splash screen (manufacturer's logo) - if not enabled give that a shot too, but I doubt that will do the trick.

    Bottom line is that the facility may not exist - OEM's tend not to show the POST screen, but they often have crippled BIOS's too.
     

  3. to hide this advert.

  4. 2009/02/28
    robls99 Lifetime Subscription

    robls99 Well-Known Member Thread Starter

    Joined:
    2004/01/16
    Messages:
    780
    Likes Received:
    1
    Pete,

    Thanks, but I couldn't find any options that you mentioned or anything else that was relevant.

    Rob
     
  5. 2009/03/01
    Bill

    Bill SuperGeek WindowsBBS Team Member

    Joined:
    2002/01/11
    Messages:
    3,371
    Likes Received:
    412
    Bill,
    #4
  6. 2009/03/01
    robls99 Lifetime Subscription

    robls99 Well-Known Member Thread Starter

    Joined:
    2004/01/16
    Messages:
    780
    Likes Received:
    1
    Bill,

    Much thanks. That Silent Boot is what I want But as the manual says, not all options are available on any particular board. I carefully went thru all options on:

    F2 Bios (eg under Boot tab) and
    F10 Boot Menu (which just shows 3 choices for drive selection)

    and it Ain't There! Oh well .............
     
  7. 2009/03/01
    Bill

    Bill SuperGeek WindowsBBS Team Member

    Joined:
    2002/01/11
    Messages:
    3,371
    Likes Received:
    412
    Well, I happen to like all that data going by because if it fails during boot, I might get a better idea of where in the process. Sadly, instead of concentrating on performance once booted up, MANY users have been complaining that it can take 3 or 4 minutes, or longer to boot. Since my normal advice is to leave systems on 24/7, or turn on once in the morning, then off last thing at night, I fail to see the problem if it takes a couple extra minutes to boot, as long as the system is stable once up.

    But, motherboard, firewall, and anti-malware makers listened, as did Microsoft, and faster boot times seems to have moved off the back burner. I don't have a problem with that, as long as I still have the option see the entire boot process. But as you note, on some versions of some boards, the option is not even provided. I think that is too bad.

    Technically - it does not matter how long a boot process takes, as long as there are no abnormal delays caused by flaky drivers, corrupt files, or failing hardware. My XPPSP3 computer consistently takes just over 4 1/2 minutes to boot. Some would think that too long. I don't.

    Note if you use a disk cleaning program like Windows Disk Cleanup, or CCleaner, some files not able to be deleted during the cleanup, are deleted during the next boot - which can significantly increase boot times.
     
    Bill,
    #6
  8. 2009/03/01
    robls99 Lifetime Subscription

    robls99 Well-Known Member Thread Starter

    Joined:
    2004/01/16
    Messages:
    780
    Likes Received:
    1
    I agree.
     
  9. 2009/03/02
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    To save me searching, do you have a link to the motherboard manual? They are referring to it with all sorts of names these days (hey, everybody wants to save a few seconds, except maybe us :D)
     
  10. 2009/03/02
    robls99 Lifetime Subscription

    robls99 Well-Known Member Thread Starter

    Joined:
    2004/01/16
    Messages:
    780
    Likes Received:
    1
  11. 2009/03/03
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    This is BIOS listing for your model:
    http://download.intel.com/support/motherboards/desktop/sb/biosglossarybymenu_v10.pdf
    (I was glad there more information than the "Product Guide" :rolleyes:)

    These are from under the heading Boot Menu
    You can set the "Rapid" boot to disabled if you want it to perform the extra tests, full POST I suppose. Silent Post disables the Intel splash screen.

    Matt
     
  12. 2009/03/03
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    If you run Vista, check into the Sleep function. I used to always shut down before Vista. Now with Vista Sleep, my system appears to be shut down, but it starts up to the same place where I left it.

    I don't shut down any more using Vista Sleep, only reboot occasionally.

    Matt
     
  13. 2009/03/04
    robls99 Lifetime Subscription

    robls99 Well-Known Member Thread Starter

    Joined:
    2004/01/16
    Messages:
    780
    Likes Received:
    1
    mattman,

    Thanks but unfortunately the features you mentioned do not appear in my bios screen.
     
  14. 2009/03/04
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    I would "contact them" and ask:
    http://support.intel.com/support/feedback.htm

    I now see the Glossary is the same as Bill's dictionary. I am not impressed that they can't offer a manual offering specific BIOS setting for each model.
    Matt
     
  15. 2009/03/04
    Bill

    Bill SuperGeek WindowsBBS Team Member

    Joined:
    2002/01/11
    Messages:
    3,371
    Likes Received:
    412
    Sadly, that is a common practice, not exclusive to Intel. :( It does not bother me too much with the hardcopy manual included with products, but I feel on-line manuals should be specific for brand, model, AND revision number. But only my dog really listens to me, and I think he's just being courteous.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.