1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

Help with RRAS in Win2kServer (subneting)

Discussion in 'Windows Server System' started by Spanjis, 2006/01/11.

  1. 2006/01/11
    Spanjis

    Spanjis Inactive Thread Starter

    Joined:
    2006/01/11
    Messages:
    1
    Likes Received:
    0
    Hello.

    I have a LAN with 5 computers.
    Subnet mask 255.255.255.128
    IP 192.168.2.1/2/3 and 192.168.2.129/130
    4 machines with Win2000 and one Win2000 Server.
    The server has only 1 nic.

    I want 192.168.2.1 to communicate with 192.168.2.129.
    Im not sure what to do in RRAS, have tried to googled for help without any luck.
    Hope someone can help me.

    Thanks!
     
    Last edited: 2006/01/11
  2. 2006/01/13
    ReggieB

    ReggieB Inactive Alumni

    Joined:
    2004/05/12
    Messages:
    2,786
    Likes Received:
    2
    I wouldn't use RRAS.

    First the simple solution - change all the subnet masks to 255.255.255.0. All the PC will then talk directly.

    However, as I expect you have seperated the LAN for a good reason (perhaps 192.168.2.129 is your accounts PC), the second solution is get the server on both subnets. To do that, assign a second IP address to the server's NIC. 192.168.2.254 would do nicely.

    Personally I would have subneted on the third Octet. That is used 192.168.0.x for the three PC, and 192.168.1.x for the seperate PC. For greatest tweaking potential, I'd us 10.w.x.y/255.255.0.0. w would seperate the subnets, you can use x to split communicating devices (servers use 0, routers and switchs use 1, printers use 2, client PC use 10) and y gives you an individual address for each node.
     

  3. to hide this advert.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.