DVD writer [error using Anydvd]

I have a Artec DVD writer, it was burning ok until i install Anydvd, now everytime i download a movie, and try to burn it wont work,
Blue screen come up with error message
IRQL_NOT_LESS_OR_EQUAL
STOP* 0X0000000A (0X82850FF5, 0X00000002, 0X00000000, 0X804FEACC)
I tried everything unistal anydvd unistal dvd reinstal, uninstall nero. still same problem.
os:Windows XP service pack 2
processor Athlone AMD 1.2ghz
Memory 512mb
please i need help

 

Hello bazeze,

You don't say what OS. I'll assume XP.

Try a System Restore just prior to your installation of Anydvd.

Regards - Charles

 

first of all i would like to apologise for multi posting my forum.
I did try to system restore but with no vain.
Still The screen of death Apear (Blue screen) with full of error messages

 

Hello bazeze,

I did try to system restore but with no vain

Does that mean, yes it restores but same problem, or, no can't restore?

Regards - Charles

 

no it cant restore the system.
I try all the restore Point,
But it Won't restore the System.

 

Ok bazeze, my canned response, see if that works.

System Restore doesn't work

One reason - the space allocated to System Volume Information is filled to the maximum which is 12% of Drive space. Neither XP or WinME handle this situation well.

To make room: right click on My Computer > Properties > System Restore tab and for the Monitored drive > settings. Move the slider left to 6% and reboot. This will make room for the Restore Operation. Afterwards, reset the slider back to 12%.

Regards - Charles

 

Thanks charlesvar,
I did get my System restore,
I try to record it did record and is playing
But after it finish recording the screen of death came back
This time with new Message
*MEMORY_MANAGEMENT
* STOP 0X0000001A (0X00041284, 0X7C937001,0X00000048, 0XC0503000)

 

Hello bazeze,

The reference I found was for WK2 - not XP:
http://support.microsoft.com/search...EMENT&Query=STOP+0x0000001A+MEMORY_MANAGEMENT

The remedys outlined is one to remove the hardware from the system in device manager and two to replace the RAM.

To do the first, right click on My Computer > Hardware tab > Device Mamager > expand the ROM devices > right click on the device > uninstall. Then reboot allowint the system to reinstall the device.

To check the RAM:

EDIT: Double posted - take this one off.

 

Hello bazeze,

The reference I found was for WK2 - not XP:
http://support.microsoft.com/search...EMENT&Query=STOP+0x0000001A+MEMORY_MANAGEMENT In any case, the folllowing would be done for any OS.

The remedys outlined is one to remove the hardware from the system in device manager and two to replace the RAM.

To do the first, right click on My Computer > Hardware tab > Device Mamager > expand the ROM devices > right click on the device > uninstall. Then reboot allowing the system to reinstall the device.

To check the RAM: Download MS's memeory software and run that http://oca.microsoft.com/en/windiag.asp If you have more than one memory stick, try switching them or using one at a time.

Regards - Charles

 

Same thing recording.(only CD but DVD hangs)
Finish, then screen of death, This time new Error
*STOP BAD_POOL_HEADER
If I make the DVD writer as Master and Dvd rom Slave,will it help

 

Hi bazeze,

If I make the DVD writer as Master and Dvd rom Slave,will it help

Don't know whether it would help or not, but by all means try it. Make sure you can reverse any changes made.

Did you make any changes to the ROM drives along with the install of the DVD writing software? If the current setup is the same as its always been and worked prior to the problem, then that's probably not the issue.

This might also be a driver issue, look for the most current driver for the DVD and re-install them. In the Device manager, roll back the current driver and install the latest if there is one.

If none of this works then you may have to repair the installation, do you have a XP CD?

Regards - Charles

 

Everything was working perfect
until i install anydvd programe
yes i do have xp cd with service pack one
should i install it and not to upgrade to service pack 2

 

Hi bazeze,

SP2 is not going to resolve this issue. As you write Everything was working perfect and would muddy the waters further. After you get this issue staightened out, then you should consider installing SP2.

Take a look at the reference on how to do a repair of XP:
http://www.michaelstevenstech.com/XPrepairinstall.htm

Whatever happened corrupeted some part of the OS.

Regards - Charles

 

sorry Charlesvar,
what i mean is if i reinstal windows XP with service pack one
will it remove the service pack2?
I already Have the service pack 2 before the problem start.
May be the service pack 2 is the problem.


regards

Bazeze

 

Hi bazeze,

what i mean is if i reinstal windows XP with service pack one
will it remove the service pack2?
Yes.

I already Have the service pack 2 before the problem start.
May be the service pack 2 is the problem.
Always a possibility, but I don't think so.

Regards - Charles

 

Try reapire windowsXP nothing happen,
could it be the hard ware fault.
i just bought it recently.
If i change the hardware will it help.
It will be the same make(artec)
everytime some new error pop up
will i Format and reinstall windows.
I don't want but if that the only solution then be it.
if i format which will you prefer? at the moment i have FAT32.
sholud i Go for NTFS

 

Hi bazeze,

Sorry, I don't seem to be helping much here.

will i Format and reinstall windows.
I don't want but if that the only solution then be it.
It may not be the answer, that's the problem. However, there are benefits to a clean install: for one thing you would get rid of all the accumualted junk which is inevitable in running an OS over time.

sholud i Go for NTFS
Yes, it's more efficiant over time, it defragments less and the potential for making it more secure is greater.

If i change the hardware will it help.
Well, that's the jackpot question - if your prepared to do it, then by all means do so.

What is the brand of the DVD burner? Someone looking at this may have some info peculiar to that make.

Regards - Charles

 

I have ARTEC dvd Burner.
but if i swap i will get the same brand.(still under waranty)
Am i gonna get the same problem if the make is the same.
Thanks Charlesvar, I do appreciate your effort
Even though still have some problem,but i learn a great deal of you.

 

Hi bazeze,

I have ARTEC dvd Burner
Sorry, you did mention the brand in the beginning, I never heard of it and didn't stick.

Am i gonna get the same problem if the make is the same.
Before you tried AnyDVD, the softare you had problems with, what were you using? Or was that the first DVD burining software you tried?

Regards - Charles