What Arie means is that you should post the solution you found in your notes and then mark the thread as resolved. I have at least two cups of...
I have received a new kit TW3X4G1333C9A. I fitted the modules in slot 1 and slot 3 running in dual channel. Tuesday to Thursday, I have done three...
I've run out of ideas but slipstreaming SP3 to the original Dell XP SP2 CD would be my next step. I know it's a long shot and as I understand it,...
Did you delete both partitions, the "Win7 partition" and C:, followed by recreating a new partition occupying all space on the hard disk, prior...
How did you do the upgrade? A clean installation of Win7 with a reformat? If so, there's a chance that you have a hidden partition from...
Thanks hawk22!
hawk22, thanks for the tip but G.Skill is a stranger in Sweden! Bill, I've used Kingston on earlier builds and have not had any problems....
Yesterday, I posted the first results using Kingston KVR1333D3N9/2G but ... :confused: ... the post is gone. I don't know what I did to make that...
I've been away from home and have not had time to carry out tests in all slot/module combinations. Tests on BIOS F5a: Dual channel,...
Corsair say it's compatible and the "same" kit works in other builds based on the "same" hardware (according to my friend and Gigabyte GTS)....
Hypothetical scenario: I swap PSU's. I still have cold start problems. What have I proved? That my RAM is bad! What have I not proved? If...
I took the same precautions when working on both builds. An anti-static mat and a wrist band connected to the nearest ground point. The subsequent...
If my friends RAM-modules do not result in cold start problems in my build, doesn't that indicate that my modules are bad and the PSU probably good?
Okey, I understand but it would be easier to swap the RAM-modules between the two. If his modules have no cold start problems in my build, then my...
There's nothing old in my new build. My friends PSU is "old" ... :rolleyes: ... eight months or so (I don't remember when I replaced his failing...
Hi Hugh! Since I built his system a few years ago and upgraded it a few weeks ago ... :cool: ... I believe I could insist on borrowing his PSU...
BIOS F5a was not the solution. In dual channel, slots 1+3, Memtest86+ v4.10 returned errors at cold start. Reboot > still errors. Power off +...
Well, as I understand it, the problem was not resolved ... :p ... the computer was scrapped!
I had the opportunity to ask so I didn't wait. Gigabyte GTS used ver3.13 in their tests.
Well, it's still only two but I agree. My most recent (I nearly wrote "last" ... :rolleyes: ...) post at Corsair: If it still doesn't work with...
Separate names with a comma.
