1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

[Windows XP stops at agp440.sys]

Discussion in 'Windows XP' started by BooKooGuru, 2009/04/18.

  1. 2009/04/18
    BooKooGuru

    BooKooGuru Inactive Thread Starter

    Joined:
    2009/04/18
    Messages:
    2
    Likes Received:
    0
    I have the same problem with my XP on a Sony Vaio desktop. Won't boot in safe mode. Locks at agp440.sys. Any help would be greatly appreciated. I recently added a different monitor about a week ago, but it worked fine for about a week. Thanks in advance, Ramona
     
  2. 2009/04/19
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63

  3. to hide this advert.

  4. 2009/04/19
    BooKooGuru

    BooKooGuru Inactive Thread Starter

    Joined:
    2009/04/18
    Messages:
    2
    Likes Received:
    0
    thanks

    Matt, I appreciate the link, but my problem is the only recovery discs I have for this computer are Sony "system recovery ". I know the Windows XP recovery and repair must be somewhere on these discs, but I have some pretty valuable data and pics on the Vaio that I don't have backed up, so I really don't want to do a complete "system recovery ". I know the computer itself has not completely quit, so my pics and docs are safe. I just need to get them off there before I do an XP recovery. Any ideas? Thanks, Ramona
     
  5. 2009/04/20
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    If the only option seems to be to use the recovery disks, I would get an external 3.5" drive case, for example
    http://www.newegg.com/Product/Produ...ption=external cases&name=External Enclosures
    (check the interface, SATA or IDE)
    take the HDD (Hard Disk Drive) out and put it in the external case. I would get a new 3.5" HDD and try running the recovery disks on that. If you install Windows on the new HDD, connect the old drive and copy your data. When the data is copied the old HDD can then be formatted and used as a backup drive.

    The drive could also be connected into another PC to copy across the data.

    Being a beginner, you should find somebody with experience that could help you or take it to a professional.

    Matt
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.