1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

windows xp repair install

Discussion in 'Windows XP' started by Brice3010, 2008/10/27.

  1. 2008/10/27
    Brice3010

    Brice3010 Inactive Thread Starter

    Joined:
    2004/12/29
    Messages:
    9
    Likes Received:
    0
    I installed a clean win xp professional OS on a new rig (quad processor), no issues. Then I did a Acronis recovery from a uniprocessor pc, and installed the correct mobo drivers. Still no issues. The I did a restart and a repair install to load the mobo sata and AHCI drivers. The pc restarts, but everytime I open a program from windows, for example Windows Explorer, or Software from the configuration screen, or Network Connections, I get a window with "Windows Installer ", waiting for something to load.

    The version of windows on my old pc is sp3, after the repair install (I used a win xp slipstreamed with sp2), I see sp2 on my info screen of computer properties.

    What should/can I do to solve this Installer window?
     
  2. 2008/10/27
    PeteC

    PeteC SuperGeek Staff

    Joined:
    2002/05/10
    Messages:
    28,896
    Likes Received:
    389
    I think there are 2 possible solutions .....

    The repair install has knocked out SP3 - I would install it and see if that resolves the problem - you have probably confused the Registry :) - or

    Run the Windows Installer Cleanup Utility and remove any entries to software which is not installed.
     

  3. to hide this advert.

  4. 2008/10/27
    Brice3010

    Brice3010 Inactive Thread Starter

    Joined:
    2004/12/29
    Messages:
    9
    Likes Received:
    0
    How should I best restore an image of the system and user files from a uniprocessor pc to a multiprocessor machine? I know of Acronis True Image, and I know ntbackup.

    I will try your solution, but I think I should also better do a repair install from the same sp-level cd as the original system, ie I will make a slipstreamed sp3 version of my windows xp cd. Question remains, how would you recommend I make a copy of my windows xp system and user files from an old pc to a different HAL-computer (from uni- to multiprocessor).

    Thanks in advance for your most valued response.
     
  5. 2008/10/27
    PeteC

    PeteC SuperGeek Staff

    Joined:
    2002/05/10
    Messages:
    28,896
    Likes Received:
    389
    This is getting a little deep for me :)

    After you re-imaged the drive how many processors were showing in Device Manager. It may be that Windows Installer wants to install the processor driver?

    I would have thought that you would have installed the SATA drivers at F6 on the installation screen, not by running a repair install. XP has only very limited SATA driver support - my Asus A8N-SLI is an example of where the SATA drivers must be loaded at F6 or the drives are not recognised.
     
  6. 2008/10/27
    Brice3010

    Brice3010 Inactive Thread Starter

    Joined:
    2004/12/29
    Messages:
    9
    Likes Received:
    0
    I had a mobo exactly like yours until it blew up after the southbridge fan failed and subsequently grilled the southbridge.

    I installed the correct sata/ahci drivers with F6, but I think that doing a Acronis recovery did overwrite those drivers (the image is from a uniprocessor mobo with different sata chipset: KT600). So I did a repair, reinstalled the correct sata/ahci drivers, but in my stupidity did the repair with a sp2 win xp cd!

    At the moment I am making a slipstream of a virgin win xp cd, with sp3, and with the correct sata/ahci drivers integrated. And after doing the Acronis recovery, in fact installing the uniprocessor setup, I will try and load all the correct mobo drivers; before any reboot.
    I will keep you posted.
     
  7. 2008/10/28
    hawk22

    hawk22 Geek Member

    Joined:
    2002/01/31
    Messages:
    1,991
    Likes Received:
    26
    Hi Brice3010, I did try that and it failed, the SATA drivers must be copied including the .txt file onto a floppy disk then do the F6 trick then S and windows will look at the floppy and wait for you to select them depending on your system.
    This is the crazy bit CD, USB Stick will not work.
    hawk22
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.