1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

Windows Vista cpu fan not working

Discussion in 'Legacy Windows' started by mario, 2008/02/21.

  1. 2008/02/21
    mario

    mario Well-Known Member Thread Starter

    Joined:
    2003/02/15
    Messages:
    193
    Likes Received:
    0
    Hello,

    I noticed that after I restarted my laptop from sleep the cpu fan did not work even though the laptop got hot. I restarted and it worked ok, I then chose hibernate and after a few minutes I restarted again and fan worked normally, I closed again using sleep and when restarted the fan again did not work so I am assuming it is a software problem, any help please ?? I have Windows Vista home premium installed.
     
  2. 2008/02/21
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    In Help and Support, enter the term hybrid. Try using the hybrid settings.

    You should look up the FAQs (Frequently Asked Questions) for your laptop model at the manufacturer's website. Check for questions related to power saving.

    You should check for an update for the chipset drivers.

    You may need to upgrade the BIOS.

    Matt
     
    Last edited: 2008/02/21

  3. to hide this advert.

  4. 2008/02/22
    mario

    mario Well-Known Member Thread Starter

    Joined:
    2003/02/15
    Messages:
    193
    Likes Received:
    0
    I tried the Hybrid option but still no sucess, thank you for your help. I am not tempering with the bios, if ever I need to shut down temporarily I will use hibernate. Thank you again and best regards
     
  5. 2008/02/23
    mattman

    mattman Inactive Alumni

    Joined:
    2002/06/10
    Messages:
    8,198
    Likes Received:
    63
    Mario, no problem:)

    You are right, changing things in the BIOS can cause BIG problems. You can LOOK though, without changing settings. Check the manual when you look at them though. You will learn about your computer. It will not break it if you learn about it. Try to find out what the settings mean. You can check settings, but not change them.

    As an instance, upgrading a BIOS is not hard, it should only be a matter of following the instructions carefully.

    Investigate, investigate and, mmm... double-check. That is how you will go from beginner to intermediate to experienced (experienced may be relevant :D).

    Look for information...be it Windows Help and Support, internet searching, or reading the manual. The information is out there.
    :)
    Matt
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.