1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

What does "wake" mean?

Discussion in 'Windows XP' started by rlambert7, 2006/11/20.

  1. 2006/11/20
    rlambert7

    rlambert7 Inactive Thread Starter

    Joined:
    2003/09/10
    Messages:
    199
    Likes Received:
    0
    Before anyone answers let me provide some background and context.

    I have an IBM Netvista PC running XP Pro. I have "Screen Saver" configured to "Wait 5 minutes ", and have the "On resume, display Welcome screen" box checked. Under the "Power" button I have "Turn off monitor ": 15 minutes; "Turn off hard disks ": 1 hour; "System Standby ": 2 hours; "Hibernate ": Never.

    I noticed that my batch (Scheduled Tasks) jobs don't run when scheduled (although, I can make them if I right click them, and select "Run "). I happened to be looking under "Properties-->Setting" on one of my batch jobs, and noticed a box called "Wake the computer to run this task ". I checked that box on all of my batch jobs, and now they run at the times I have the scheduled to run.

    So, here are my questions: Does "wake ", in 'Wake the computer to run this task', mean coming out of "hibernate ", or can it mean coming out of "standby ", too? Also, how could I know if my PC is coming out of "hibernate" or coming out of "standby "?

    I don't think I have asked my PC to "hibernate" based on the "Power" settings under "Screen Saver ", but I should mention that there is a "Hibernate" tab under the "Power" settings under "Screen Saver ". Under that tab the "Enable hibernate" box is checked. I did not check that box, it must be the default that was set during the XP installation.

    Thanks.
     
  2. 2006/11/20
    TonyT

    TonyT SuperGeek Staff

    Joined:
    2002/01/18
    Messages:
    9,072
    Likes Received:
    400
    Coming out of standby.
     

  3. to hide this advert.

  4. 2006/11/21
    Bill Castner

    Bill Castner Inactive

    Joined:
    2006/08/30
    Messages:
    1,980
    Likes Received:
    0
    From either hibernate or standby, if your BIOS is compliant enought with ACPI standards to accept the C3 power mode change as a restart.

    Remember too that Scheduled Tasks will not run for a user logon that does not have a password.

    That is why you can Run them, but they will not automaticly run during a scheduled time: http://support.microsoft.com/?kbid=310715
     
  5. 2006/11/21
    Bill Castner

    Bill Castner Inactive

    Joined:
    2006/08/30
    Messages:
    1,980
    Likes Received:
    0
    Power Related User Configuration Tip:

    You can script, use in a .CMD or .BAT file rather sophisticated power settings that are not exposed in the Power Options GUI Interface using the Powercfg.exe utility introduced with Service Pack 2.

    Start, Run, powercfg /? to see the options available to you.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.