Searching For a Motherboard

Hi all,
Just wonder if there is anyone out there to point me in the right direction.
Anyone know of a Motherboard for a Pentium 3 1000MHz (I know it's old but I like it) that has a header for USB2 and AGP Port.
Reason is I have bought a Internal USB2 Card reader that will not connect to my USB2 PCI card only has the wires for a header.
always hoping
hawk22

 

hawk22, Hello again, long time no contact.
I found these two, but you'll need to get a USB2.0 PCI Card because these have only USB 1.1 on Board.... But that can be turned off in the BIOS I believe.
http://www.tigerdirect.com/applications/category/category_slc.asp?CatId=181&

HTH

 

Hi there Irdreed yes it has been a while, as you can see I am still tinkering around.
This is the problem the mobo that I have in the PC I have installed a USB 2 Card
as the mobo only supports 1.1. The card reader though is USB2 and it will not connect to a standard USB plug like you have on the USB2 PCI cards it only connects to Headers (the little Pins) unless there are adaptors available for them I don't know.
I have 2 of those Intel Pentium 3 1000 MHz Coppermine CPU's shame to throw them away.
Still hoping
many thanks for now
hawk22

 

Hawk22, Take a look at this and see if it's what you're looking for.
http://www.newegg.com/Product/Product.asp?Item=N82E16813136146#DetailSpecs
(Just noted this guy does not have a AGP Slot........)

OR Try this PCI Card with Internal Headers on Board
http://www.newegg.com/Product/Product.asp?Item=15-201-206&depa=0

 

Hi there irdreed,
the mobo sounds good it has USB2 headers onboard a bit short on options like no AGP port and only 2 Ram sockets, but then it is very cheap so I guess you can't ask for too much, but yes this is the type of mobo that I am looking for.
The USB 2 PCI card with headers would be the best, except it has a Ali chip and my Canon 8000F Scanner will only work with a USB2 cards with a NEC chip.
Maddening all this little hickups.
But thanks Irdreed I am a lot further now than I was 6 days ago.
At least now I know that these things still exist Dinasours are still alive.
great going
hawk22

 

hawk22

Love that expression!!