1. You are viewing our forum as a guest. For full access please Register. WindowsBBS.com is completely free, paid for by advertisers and donations.

DNS Problems causing Active Directory to crash

Discussion in 'Windows Server System' started by rakem, 2005/12/13.

  1. 2005/12/13
    rakem

    rakem Inactive Thread Starter

    Joined:
    2005/08/22
    Messages:
    31
    Likes Received:
    0
    We have been having some DNS issues on a few of our servers which i believe are causing Active Directory to crash. When trying to access active directory user and computers, domains and trusts, we sometimes get the erroe "the server is not operational" Usually a reboot fixes the problem but this is not always the easy to do as we have clients accessing the servers 24 hours a day.

    Upon examination of the DNS logs there are numerous errors such as:

    Event ID 4015:
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is " ". The event data contains the error.

    Event ID 9999
    The DNS server has encountered numerous run-time events. To determine the initial cause of these run-time events, examine the DNS server event log entries that preceded these run-time events. The data is the number of events that have been suppressed in the last 60 minute interval.

    Event ID 404
    The DNS server could not bind a Transmission Control Protocol (TCP) socket to address 0.0.0.0. The event data is the error code. An IP address of 0.0.0.0 can indicate a valid "any address" configuration in which all configured IP addresses on the computer are available for use.
    Restart the DNS server or reboot the computer.

    EVent ID 408
    The DNS server could not open socket for address 0.0.0.0.
    Verify that this is a valid IP address for the server computer. If it is NOT valid use the Interfaces dialog under Server Properties in the DNS Manager to remove it from the list of IP interfaces. Then stop and restart the DNS server. (If this was the only IP interface on this machine and the DNS server may not have started as a result of this error. In that case remove the DNS\Parmeters\ ListenAddress value in the services section of the registry and restart.)

    If this is a valid IP address for this machine, make sure that no other application (e.g. another DNS server) is running that would attempt to use the DNS port.


    There are hundreds of these errors all through the error log, Our DNS has seemed to work well for quite a long time, there have been no major changes to the system that would be causing these errors.

    All servers are windows 2003

    any one got any suggestions?
     
  2. 2005/12/13
    Newt

    Newt Inactive

    Joined:
    2002/01/07
    Messages:
    10,974
    Likes Received:
    2
    causing Active Directory to crash

    You will need to explain what you mean by that.

    You speak of rebooting servers but don't say which one(s). Are you bouncing one or more of your DNS servers to clear this error or only the box that fails the connection?

    How many DNS servers are you running?
     
    Newt,
    #2

  3. to hide this advert.

  4. 2005/12/14
    rakem

    rakem Inactive Thread Starter

    Joined:
    2005/08/22
    Messages:
    31
    Likes Received:
    0

    OK the problem is occuring with 3 DNS servers, which are all the PDC's of 3 different domains. All 3 servers are linked by two way trusts, and all servers and windows 2003 standard.

    When this problem occurs the only way we have found to fix it is to reboot the the server(s). Normally when the problem happens to one server it will happen to the other ones within a few days of each other.
     
  5. 2005/12/14
    Newt

    Newt Inactive

    Joined:
    2002/01/07
    Messages:
    10,974
    Likes Received:
    2
    Are you running one or more of your DNS servers as a root server by any chance?

    AD crashing - I still don't understand that.

    PDC in an AD domain setup - I don't understand that either. You should have domain controller(s) and maybe global catalog server(s) but PDC/BDC was classic NT4 domain stuff.
     
    Newt,
    #4
  6. 2005/12/14
    Scott Smith

    Scott Smith Inactive Alumni

    Joined:
    2002/01/12
    Messages:
    1,950
    Likes Received:
    4
    Just a shot in the dark but what your doing with the trusts may require Enterprise.
     
  7. 2005/12/14
    rakem

    rakem Inactive Thread Starter

    Joined:
    2005/08/22
    Messages:
    31
    Likes Received:
    0
    No no root servers.

    by AD crashing i mean that when i try to open up AD either users and computers, domains and trusts or sites and services, it doesnt open and a big long error message comes up that I cant remember right now but the last thing it says is "The server is not Opperational." And AD wont even open up. Only a restart fixes it for a while.

    Yes sorry for the PDC reference, force of habbit. All servers are just DC's for their respective domains
     
  8. 2005/12/14
    rakem

    rakem Inactive Thread Starter

    Joined:
    2005/08/22
    Messages:
    31
    Likes Received:
    0

    why would it require enterprise?
     
  9. 2005/12/14
    Scott Smith

    Scott Smith Inactive Alumni

    Joined:
    2002/01/12
    Messages:
    1,950
    Likes Received:
    4
    After doing some digging I couldn't find the answer I was looking for in Standard Vs Enterprise.

    It appears all versions support this:
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.