AIDA32 SMART readings

Hello all!

In AIDA32 - Storage - SMART, I have the following temperature readings for my two HDDs:

HDD1 - 22, 25 immediately after start and 22, 42 after an hour or so

HDD2 - 23, 25 immediately after start and 23, 44 after an hour or so

The second value is obviously the drive temperature but what are the 22 and 23 readings?

Thanks for Your time,
Christer

 

Widen the columns in aida when viewing this.

 

I did ...... ...... but nothing was hidden ...... ...... !

Christer

 

Thanks for that lee ...... !

Since I have no web space, I cannot show what mine looks like but this is copied from a plain text report:



[ HDS722512VLAT80 (VNR33EC3C9DR1K) ]

01 Raw Read Error Rate 60 100 100 1 OK: Value is normal
02 Throughput Performance 50 100 100 0 OK: Value is normal
03 Spin Up Time 24 125 125 15335668 OK: Value is normal
04 Start/Stop Count 0 100 100 50 OK: Always passing
05 Reallocated Sector Count 5 100 100 0 OK: Value is normal
07 Seek Error Rate 67 100 100 0 OK: Value is normal
08 Seek Time Performance 20 100 100 0 OK: Value is normal
09 Power-On Time Count 0 100 100 132 OK: Always passing
0A Spin Retry Count 60 100 100 0 OK: Value is normal
0C Power Cycle Count 0 100 100 48 OK: Always passing
C0 Power-Off Retract Count 50 100 100 52 OK: Value is normal
C1 Load/Unload Cycle Count 50 100 100 52 OK: Value is normal
C2 Temperature 0 127 127 22, 43 OK: Always passing
C4 Reallocation Event Count 0 100 100 0 OK: Always passing
C5 Current Pending Sector Count 0 100 100 0 OK: Always passing
C6 Off-Line Uncorrectable Sector Count 0 100 100 0 OK: Always passing
C7 Ultra ATA CRC Error Rate 0 200 200 0 OK: Always passing

[ IC35L040AVER07-0 (SX0SXL17272) ]

01 Raw Read Error Rate 60 100 100 0 OK: Value is normal
02 Throughput Performance 50 100 100 0 OK: Value is normal
03 Spin Up Time 24 116 116 12452028 OK: Value is normal
04 Start/Stop Count 0 100 100 28 OK: Always passing
05 Reallocated Sector Count 5 100 100 0 OK: Value is normal
07 Seek Error Rate 67 100 100 0 OK: Value is normal
08 Seek Time Performance 20 100 100 0 OK: Value is normal
09 Power-On Time Count 0 100 100 79 OK: Always passing
0A Spin Retry Count 60 100 100 0 OK: Value is normal
0C Power Cycle Count 0 100 100 28 OK: Always passing
C0 Power-Off Retract Count 50 100 100 28 OK: Value is normal
C1 Load/Unload Cycle Count 50 100 100 28 OK: Value is normal
C2 Temperature 0 119 119 23, 46 OK: Always passing
C4 Reallocation Event Count 0 100 100 0 OK: Always passing
C5 Current Pending Sector Count 0 100 100 0 OK: Always passing
C6 Off-Line Uncorrectable Sector Count 0 100 100 0 OK: Always passing
C7 Ultra ATA CRC Error Rate 0 200 200 0 OK: Always passing



Seems like an incompatibility issue to me ...... ...... motherboard possibly.

Christer

By the way, I noticed that upgrading the firmware on the 60GXP (the second one) made it brand new, all counters were reset!