This is a duplicate post. There is also one in Win98 Forum devildog#4 PLEASE do Double post. BillyBob
This is a duplicate post. There is also one in General Discussions.. That I replyed to. devildog#4 PLEASE do Double post. BillyBob
OK. change cable does not fix. On to the next question. Where is the NIC getting power from ? If it were not powered there would be no...
If you are using Windows lower than ME just put a floppy disk in and do a Start~Run~and type SYS A: That will make a clean boot only floppy....
Well Newt it looks like it may depend on where we live and the ISP. For the first 6 months I was about ready tell Time Warner what to do with...
:) Hub vs Router question settled. No more questions there.:) Same one I have and for the same reason(s) Question; Have you changed...
That is dangerous ? If you get the same results with or without the Router then there has to be something VERY different between our setups. It...
I am out of ideas at the moment. But Friend suggested that I ask if the NIC was intergrated into the Motherboard or a plugin card ? BillyBob
I do not know for 100% sure but I highly suspect that the problem(s) have a lot to do with Internet Connection SHARING Newt might be able to...
I have the same problem with my Printer. ( Parallel Port ). I had the same thing with a US Robotics Serial Port Modem When I was just testing...
Just testing I just hit the rest button and as long as I held the button the connection lights on the Router stayed out because the NIC was not...
I am not in anyway ruling out a bad cable. This is what is puzzling me also. But somehow, some way that NIC is maintaing power. And I think...
I have an HP5 with a duplex unit. I would give anything if I had sprung for the extra $150 (at the time) for the "N" model (for Network). It...
From another thread that I replied to Sygate can't even find my machine. Due to ( it says ) the Router. Symantec can't find the ports either...
I asked about the power to the Router because if if not powered there would be no lights. Bad cable or not. Also the Nic has to be powered....
iceolated I would like to ask a favor of you. Please try going to Symantec.com and run their port test. I myself have the same questions so...
Well that is good news. But even though things are working right now I would give some though to changing over to what I believe would be a...
That is standard procedure I believe. I can unplug any cable from any machine and the lights go out. Simply becasue the connection is broken. If...
Where is the power shut off ? At the Front panel of the PC. Or powered off at shutdown by Windows ? Or at the Surge Supresser that feeds...
OOPS !! I see what newt thinks and my reply says I agree. BillyBob
Separate names with a comma.
