That will probably take care of the issue but man, I hate to see you have to remove SP2. Shame the game coders don't get their act together and...
Take a look Here. The network adapter for your PS2 should make setup pretty easy. 10Mbps is a pretty slow network though. Almost certainly...
Install NetBEUI on both PCs and if they network OK with it but not without it, you are looking at a firewall issue. NetBEUI can't 'see' a...
It may try - I don't think so but I really don't know how smart the network pieces are. It will fail if it tries but fail fast enough you won't...
Unless you have some hardware that can auto-sense the type of cable (regular or crossover) and compensate, you MUST be using the proper type....
If you turn off ZA and only use the XP firewall with SP2 (plenty good for protection while you are testing and for me, good enough that I only use...
Probably better money if you start a sideline business of installing lead siding on houses (or whatever material will block the signal).
Check the status on the 3 services shown in the picture. Probably all should be not running. I think you can disable them if need be. Check...
Do post the log. It will give us a good starting place.
Mat - I'll have to leave this one for a real code-guru expert. The problem is way over my head at this point.
Click on start, on run, key insfc /scannow and OK. You will probably be asked for your XP CD.
What OS (version and service pack)?
If you are running 2K/XP/2K3, try clicking on start, on run, keying inipconfig /flushdnsand clicking OK. If that doesn't help or if you are...
Here is what you are dealing with. There should be at least one dump file generated by the stop error. Look in the General Discussions section...
If you have scheduler service starting with the default credentials, change it to an account that exists and that has admin rights to the PC. See...
Details please PeteC. What OS? Why are they using RAS? How do they connect to the internet? Router problems can cause this error?
I dunno exactly what stop code it is giving you but that ain't it. Not enough numbers. What happens when you try to boot from the CD?
Use a known good cable. Go into the settings for the network card and set it for a speed of 10Mbps and half-duplex (depending on the card this...
Hi davyh1 and welcome to the forum. What OS and service pack are you running?
Roger - try www.sysinternals.com utilities section and get TCPView and TDImon. They should give you some information about what the two user...
Separate names with a comma.
