Here's a horrible tracert although speed tests show this connection at 1.7 Mbps download speed. Tracing route to rc.yahoo.akadns.net...
This one is from my ISP and works pretty good. http://speedtest.knology.net/ My connection is junk though. :p
I knew about the dual port NICs but I wasn't aware of doing it with dual NICs.
Yea that was a typo. It's in the title of the thread.
WG603 v3 :cool:
On the 4050 go into the menu and print the network config. Information Menu/ Print configuration.
Don't know what to tell ya Oz. I have configured a lot of servers and never came across this situation. The real purpose for dual Nics is to...
I agree. Tony, Do you remember the XP wireless utility before the service pacs? Oh it was HORRIBLE! :cool:
Thats correct. An Access point is a wireless extension of a wired network. Meaning it just passes traffic through wirelessly that is managed by...
Before you shut it down take a peek in Device manager and see whats in there. That may give you a hint at what driver issues you may have. The...
Port 3389 forwards to the local IP of the server.
It's just a PC in a different package. It's possible it has a RAID controller though. So if you format you will need the RAID driver at F6
Well I have never seen a laptop that didn't have a Ethernet port on it somewhere. (large phone jack) Plug the laptop into the router with an...
Absolutely will work. To keep it simple you may need to plug in via wire for the setup but after that your on cruse control. ;)
Thanks for the catch Reggie I had a senior moment with the brain and it flipped port 25 and 110. :confused:
If your MX record is good you should be able to get to exchange from the outside from http://mail.yourdomain.com/exchange That would verify...
From the school of hard knocks make shure you set up each location with a different subnet. ;) Location 1: 192.168.1.xxx Location 2:...
Hmm that's a new one. What kind of firewall would lock it down that tight?
Thanks Reggie.
Since you have nothing to loose you can try one of the alternative Firmwares that work better that the Linksys firmware...
Separate names with a comma.