Agreed, especially if they don't understand the need to protect their network. This is very common. Some take the view that if it is unprotected...
IPconfig results indicate that connectivity should be possible. I would check for firewall settings. I had a similar problem a while back and...
This underlines the need to be sure you have all necessary drivers before upgrading to XP. It uses different drivers than 98/ME. DRD
You might want to try disabling the built-in NIC in the BIOS. Also, check for resource conflicts. DRD
An added thought. XP/2K/NT do not use setup.exe to install. The proper file from DOS is winnt.exe which is found in the i386 folder. DRD
You might try contacting your ISP and see if the cable modem needs to be reset. DRD
If this was working until now, I would look for any recent changes that may be blocking access, including Service Packs & Updates. DRD
This can be done in Network Neighbourhood > Properties or Control Panel > Network. You should see TCP/IP bindings for each NIC. Select the each...
This is easily done in Pro with Local Policies, but I don't know about Home. Maybe with a registry setting? DRD
You need to configure your router to not allow ICMP requests to come in from outside. Check the manual for instructions. DRD
My thinking was that perhaps what you were asking was not really necessary, due to trusts between domains, etc. I will leave you alone and not...
Not sure about this. Please explain the reason for this situation. It may be that you do not need to do it. DRD
This is how I handle the situation. DRD
Works for Pro, but I have never been able to find this in Home. DRD
My guess would have to be No. XP (and all other NT based OSs) use NTLDR & BOOT.INI instead of the files used by DOS-based systems. I don't know...
Here's something to try. The NIC in question is using static address, correct. Removing the settings for a default gateway will stop it from...
This message indicates that the system is looking for the files on the first partition on the master hard drive on the primary controller. It...
Two quick checks. Can you ping the address (not name) that you want to access? Did you modify DHCP to assign a new DNS address? DRD
I'm confused! You have taken the time and trouble to set up a more direct connection to the Internet (NIC2) but do not want to use it. Why did you...
As I understand it, the printer is connected to your desktop. Access the properties of the printer and enable sharing. Then on your laptop, you...
Separate names with a comma.