WindowsBBS is an online community dedicated to easily accessible technical support for those using Microsoft operating systems and other Windows software.
Our goal is to become the leading resource for computer users that require assistance with their day-to-day computer usage, including full support for networking PC's, virus & malware removal, system upgrades and general support questions.
In my small business I have an AT&T 2 wire gateway. I have two desk tops on ethernet connection and two desktops on wireless and a lap top on wireless. We have added another lap top and desk top that are on a lower level of the building with a brick wall separating the sections of the building. The signal is not quite reaching those two computers. I can see the network but the signal is not strong enough to connect. What do I need to do to boost the strength of the signal?
Didn't find the information you thought to find? Check out these Similar Threads
By default the 2Wire has the Channel set to 11 and the Power Setting set to 4. You can change the power setting to 10 and the channel between 2 & 10. Due to FFC regs using channel 1 & 11 the power setting can only go to 4 and will revert back if power is set higher on those channels.
Access the 2Wire modem/router and select Home Network. Click on the Edit Settings button for Wireless Settings. Input your password to enter Configure the Wireless Network window and make your changes. See if this helps. Otherwise go with an AP setup.
Hello mdavis1965;
I agree with the router solution.
Would like to ask whiskeyman about the configuring the power settings too.
Do I need to make another post or send a mess. direct? I'm still new at this posting stuff too.
You can try lots of things to enhance signal
Generally wi fi distance is quoted at 300 feet inside , 1000 feet outside
The limiting factor is more in terms of barriers - brick wall in this case , most likely with metal bracing
Metal pipes in walls , dense objects such as metal doors , filing cabinets , aquariums etc etc
Its often said 3 good barriers will stop signal
Signal reception is said to be line of sight , yet a lot of signal received is the bounce around
First of all , is the router up high and not cluttered
Change the channel from the default channel to any others , 1 and 11 are first picks as the other 2 distinct non overlapping channels
If you are miles away from any other buildings then this would not be concern
Yet signals from neighbors can drift in long distances suddenly out of nowhere
Default channel with most routers is channel 6
Change the SSid from default values -
even if to only add a digit
Turn on encryption
If the network adapters are g ( as opposed to b) some people say set it to g only , others will say b goes further - try b only as opposed to
mixed signals"
If the network adapters are PCI , they always work yet reception is not that great - close to floor , shielded by metal case
Try a USB network adapter along with a USB extension cable to take the adapter away from the metal case and up high
Many people say even moving the router a foot or two over can make all the difference ( bounce around)
You can try the range extenders - they usually have to be matching brands
and although high tech and impress people - it sounds like a great idea - many have found these not too useful in real life
The best thing to do - get an older Linksys WRT54G ( now sold as the WRT54GL ) ( the L stands for Linux)
You can get them on ebay and Amazon
There are third party firmware updates which add additional features - like boosting power big time
Also Linksys sold a higher power antenna for the model that you can get on ebay
Various third party firmware are available Sveasoft and Tomato are among many
Linksysinfo.org is one
Seattle wireless is another
rockinrob, welcome to the online problem-solving community at Windows BBS!
Quote:
Originally Posted by rockinrob
Would like to ask whiskeyman about the configuring the power settings too.
Do I need to make another post or send a mess. direct? I'm still new at this posting stuff too.
Please ask questions in the public forums so everyone may benefit from the discussion. There may be other people with questions similar to yours who will discover your discussion. There also may be other people besides Whiskeyman who can offer valuable input regarding answers to your questions.
Generally, "netiquette" dictates questions about one's own problems/configuration should be asked in a "New Thread" post (instead of a reply in "someone else's thread"). Posting questions about one's own problems in someone else's thread is often considered rude (also known as "thread hijacking").
A exception to this general rule might apply if you think an answer to your question might also benefit the "original poster" (OP), the person who started the thread. In such cases, the question should be phrased in general terms or in phrased such a way that the question is aimed directly towards solving the OP's problem.
======================
When you post any message at Windows BBS, please be sure you adhere to the Posting Rules and also include descriptive topic titles for your new thread posts.
To elaborate on Posting Rule #3 (Meaningful Subject a.k.a. Descriptive Thread Title),
Quote:
You might wonder why a good subject is important. First it will act as a 'filter' for people that might be interested in reading your post. With just a subject of "Need Help with my computer", quite a few members will just skip your post. Furthermore, it would force one of our staff members to read your post & decide on the appropriate title. This takes time away from answering posts.
Another reason why we ask for appropriate titles is that this makes the WindowsBBS search more useful. If you post "I receive an error STOP: 0x00000050 after the desktop loads", a user doing a search on the "STOP: 0x00000050" error will most likely find your post in his search results & may be able to solve his problem with the solution (you hopefully received).
Using a good subject line is also helpful to Internet search engines (Google, MSN and others), it helps them to properly index your post, so when another user is searching for an answer to the same (or similar) problem/issue he may come across your post.
