WindowsBBS is an online community dedicated to easily accessible technical support for those using Microsoft operating systems and other Windows software.
Our goal is to become the leading resource for computer users that require assistance with their day-to-day computer usage, including full support for networking PC's, virus & malware removal, system upgrades and general support questions.
my computer lab network was working well, but we are Format pcs and the problem is the workgroup Network the computers see itself does not see each other.
the lab contains 50 pc's. Not all work because there is breakdowns in electric.and All wires connected to the network Switch.
to setup the network i have instal the definition of the network compatible with the motherboard of the Intel type. Then set different name to all pc's. The same name workgroup
other lab's Managers told me (which have same of my lab equipment and their workgroup network work well and now domain ) They told me to change the name of workgroup and reset again. I change them only(it's like whatever the name it's must be the same) but still the same problem. You know the work on about 50 pc's its tired.
what should i do?
and
Is it possible to turn the network into domain will work well in this situation?
OS=windows xp sp2
and no internet in lab
the switch type is 3COM
REPORTS
Code:
Pinging user5 [192.168.0.5] with 32 bytes of data:
Reply from 192.168.0.5: bytes=32 time<1ms TTL=128
Reply from 192.168.0.5: bytes=32 time<1ms TTL=128
Reply from 192.168.0.5: bytes=32 time<1ms TTL=128
Reply from 192.168.0.5: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.5:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
